Recent Articles
How to Configure DMG Mori CELOS Network Settings
Overview This article includes steps to configure network settings on a DMG Mori CELOS control. Controls MAPPS V Requirements Static IP Address, Subnet Mask, & Gateway Network Drop Configure Network Settings Notate or take a picture of any settings ...
How to Program Moxa NPort 5410
Overview This article will go through the steps to program a Moxa NPort 5410 unit. Requirements PC with available Ethernet port Ethernet Cable 12-48vdc Power Supply (12vdc included) Device Search Utility (DSU) Static IP Address, Subnet Mask ...
Operator Guide - Mazak Fusion 640
Overview This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control. Controls Supported Mazatrol Fusion 640M, 640M, 640M 5X, 640M Nexus, 640M Pro Mazatrol Fusion 640T, 640TE, 640TN, 640T ...
USB & LAN Connect - Fanuc 16, 18, 21, 0i, 30i, 31i, 32i
Overview This article is for USB and/or LAN Connect hardware and includes settings, parameters, and instructions to communicate to Fanuc 16, 18, 21, 0i, 30i, 31i, 32i controls. Controls Fanuc 16-M, 16-T, 16i-M, 16i-T, 16i-MB, 16i-TB, 160i-MB, ...
How to Configure HD I/O Folder on Mazak Mazatrol SmoothG, SmoothX, and SmoothAi Controls
Overview The HD I/O Folder is used to transfer programs between the hard drive and the NC. This article explains how to set this folder. Requirements Path of desired folder on machine control, e.g. "C:\ymw\M8Y\data\MC_Backup\Predator” The folder ...