Does my Haas have the wireless network feature enabled?
Overview
Haas Next Gen Controls (NGC) have a paid wireless feature. This guide will help determine if your machine has the feature and if it's enabled.
Checking for Wireless Feature
- Press SETTING button
- Go to Network tab at the top of the screen
- Go to Wireless Connection tab
- Wireless is available
- Wireless is not available as indicated by "Feature Disabled" in red
Related Articles
How to Configure Haas NGC Network Settings
Overview This will go over how to configure the wired Ethernet settings and Net Share on a Haas Next Generation Control. Configure Wired Connection settings Press SETTING button Go to Network tab Go to Wired Connection tab To set the following ...How to Set Citizen Cincom Network Settings
Controls Known to work on modern Citizen CINCOM controls Requirements Static IP address, subnet mask, and gateway Notate or take a picture of any parameters before you change them Enable Parameter Write Press MAINT. button Press I/F Diag softkey Type ...How to Identify a Haas Next Generation Control (NGC)
Overview There are various ways to determine if your Haas has a Next Generation Controller (NGC). Screen Design Since the screen design is unique to the NGC, the screen design is the most reliable way to check if you have a Haas NGC. This is as NGC ...How to Configure Fanuc Network and FOCAS Settings
Overview This article includes steps to configure network and FOCAS settings. Requirements Static IP Address, Subnet Mask, & Gateway Network Drop Preparation Plug network cable into CD38A port, this is typically located in the main electrical cabinet ...How to Set Haas RS-232 Parameters
Controls All Haas prior to 2016 Any Haas 2016 or later with an RS-232 interface Notate or take a picture of any parameters before you change them Set Parameters Standard Transfers (Default) Press SETNG GRAPH button Press Page Down button until you ...