How to Add a FTP Server as a Windows Network Location

How to Add a FTP Server as a Windows Network Location

Overview

An FTP Server can be added to Windows as a Network Location. This allows quick access to the FTP Server. There is no limit to how many FTP network locations can be added to Windows. This article is for Windows 10 or newer operating systems, however, the steps are very similar for older operating systems. 

Requirements

  1. FTP Server IP Address

Adding Network Location

  1. Open File Explorer
    2. InfoYou can access File Explorer by right-clicking the Windows start menu and selecting File Explorer or you can search for "File Explorer" from the Windows start menu
  2. In the left panel, look for "This PC", right-click it and click Add a network location

  3. Once the wizard appears, click Next
  4. Click Choose a custom network location, click Next

  5. In the Internet or network address field, enter the FTP server address
    1. e.g. ftp://192.168.1.100

  6. On the next page, you can leave it as default to log in anonymously (most common) or uncheck to enter a username and password for the FTP server.

  7. On the next page, you can give the FTP server a name, we suggest the CNC machine name

  8. On the last page, you can opt to connect to the server
  9. Now when you go to This PC, you will find the new FTP server via a network location


    • Related Articles

    • How to Access USB LAN Connect Using a Peer-to-Peer Network

      Overview Sometimes its desired to connect a computer directly to the LAN Connect. This is useful when troubleshooting or you do not want to connect to your corporate network. Requirements USB LAN Connect Computer with available Ethernet port Ethernet ...

    • LAN Connect Operation Guide

      Overview This KB is intended to provide a description of the LAN Connect network FTP data server. The LAN Connect is an FTP server with at least 2 GB of local memory stored on a removable SD card. Data can be accessed over a LAN network as well as ...

    • How to change the USB LAN Connect Time Zone

      Overview How to change the time zone and set a time server in the USB LAN Connect INI file. Setting Time Zone Add the following to the .INI file "TIME ADJUST=##" ## = Time zone number e.g. "TIME ADJUST=-7" is Pacific Daylight Time or PDT Setting ...

    • USB LAN Connect Operation Guide

      Overview The USB LAN Connect is an all-in-one device that can transfer programs to and from a USB drive as well as act as an FTP server via a local SD card. Requirements The USB LAN Connect device will work with a CNC control that has a standard DB25 ...

    • USB & LAN Connect - Haas Classic Control

      Overview This article is for USB and/or LAN Connect hardware and includes settings, parameters, and instructions to communicate to Haas with Classic Haas Control. Controls Classic Haas Control (2016 and older or any Haas with a RS232 port) Notate or ...