How to Check Aegis Secure Key 3NX Firmware
Overview
This will explain how to check the firmware of Aegis Secure Key 3NX.
Check Firmware using Diagnostic Mode
- Press UNLOCK button, then press LOCK + 1, release, then press and continue to hold the 0 button as the RED and BLUE LEDs blink alternately. Once all three LEDs illuminate solidly, release the 0 button.
- The BLUE LED will blink a number of times to represent the number of both the major and minor revisions. The decimal point will be represented by a single RED LED blink. Upon completion, the BLUE LED will glow solidly.
- To exit the Diagnostic Mode, wait for the 20 second timeout or hold the LOCK button for approximately 7 seconds to return the key to its normal operation.
e.g. VERSION 4.1 would be indicated by four BLUE LED blinks, one RED LED blink, one BLUE LED blink, and one RED LED blink, then revert to the BLUE LED glowing solidly.Related Articles
Unable to use Apricorn encrypted USB drives with USB Connect hardware
Problem When using an Apricorn encrypted USB drive, it will occasionally lock itself requiring the code to be reentered. Reason The USB Connect hardware may unmount/mount the drive. As a precaution, the Apricorn encrypted USB drive will lock itself ...How to Update Firmware on USB Connect Products
Overview The following article will have you back up USB Connect settings and apply firmware updates. To update the firmware on a USB Connect Product, please consult with our technical support department to confirm compatibility prior to installing. ...How to Update USB LAN and LAN Connect Firmware
Requirement USB LAN or LAN Connect unit with a working network connection USB LAN or LAN Connect firmware file Preparation Download "AutoUpdate.exe (link) Download v9.53 firmware (link) Update the USB LAN or LAN Connect Firmware First, the USB LAN or ...What are the USB Connect Error Codes?
Overview A list of error codes for the USB Connect Pendant and Portable units. ERROR(2 or 4): DISK NOT FOUND Solution: Insert a USB disk key into the USB Connect and try again. ERROR(21): FILE DOES NOT EXIST ON USB Solution: File selected or entered ...How to Program USB Wi-Fi Connect
Overview The USB Wi-Fi Connect enables the loading of CNC programs onto a USB flash drive via a wireless network. This article provides a guide on programming the device for connection to your wireless network. Requirements Ability to Make a New ...