How to Check if Haas NGC Supports SMBv2 and NTLMv2

How to Check if Haas NGC Supports SMBv2 and NTLMv2

Overview

SMBv1 and NTLMv1 have long been disabled by IT departments. Newer Haas Next Generation Controls support SMBv2 and NTLMv2. The easiest way to check is by checking the Net Share settings page. 

Check for SMBv2 Support

  1. Press SETTING button
  2. Go to Net Share tab
  3. Towards the bottom, look for "Enable SMBv1 Support" or "Local SMBv1 Support", if this setting is shown, the Haas NGC supports SMBv2

Check for NTLMv2 Support

  1. Press SETTING button
  2. Go to Net Share tab
  3. Towards the bottom, look for "Enable NTLMv1+ Support" or "Local NTLMv1+ Support", if this setting is shown, the Haas NGC supports NTLMv2
Newer Haas Next Generation Control firmware will have both options shown in the screenshot below


    • Related Articles

    • How to Configure Haas NGC Network Settings

      Overview This will go over how to configure the wired Ethernet settings and Net Share on a Haas Next Generation Control. Configure Wired Connection settings Press SETTING button Go to Network tab Go to Wired Connection tab To set the following ...
    • How to Identify a Haas Next Generation Control (NGC)

      Overview There are various ways to determine if your Haas has a Next Generation Controller (NGC). Screen Design Since the screen design is unique to the NGC, the screen design is the most reliable way to check if you have a Haas NGC. This is as NGC ...
    • How to Edit Haas 9000 Programs

      Overview By default, 9000 programs are protected and cannot be edited. Enabling a parameter is required to edit 9000 programs. It is absolutely critical you know what you are doing when working with 9000 programs. Changing or deleting a protected ...
    • Does my Haas have the wireless network feature enabled?

      Overview Haas Next Gen Controls (NGC) have a paid wireless feature. This guide will help determine if your machine has the feature and if it's enabled. Checking for Wireless Feature Press SETTING button Go to Network tab at the top of the screen Go ...
    • How to Check for Fanuc FOCAS

      Overview This article will help identify if your control has Fanuc FOCAS. Check for Ethernet Port We are looking for the CD38A port, this is typically located in the main electrical cabinet or behind the LCD screen Electrical Cabinet location, common ...