How to Determine if a Haas has Spare 115vac Plugs

How to Determine if a Haas has Spare 115vac Plugs

Overview

Most Haas CNC machines have spare 115vac plugs that can be used for 115vac powered accessories. This article will help determine if your machine has them included. 
Opening the electrical cabinet should only be performed by trained technicians.

Requirements

  1. Access to Haas Electrical Cabinet

Checking for Spare Plugs

  1. Turn off the machine power and follow proper lock out/tag procedures
  2. Open the electrical cabinet
  3. In the upper righthand corner near the circuit breaks, look for 115VAC SPARES
    4. 115vac spares plugs are number P12 thru P18
  4. If you see these plugs, you have 115vac spare plugs


    • Related Articles

    • How to Identify a Haas Next Generation Control (NGC)

      Overview There are various ways to determine if your Haas has a Next Generation Controller (NGC). Screen Design Since the screen design is unique to the NGC, the screen design is the most reliable way to check if you have a Haas NGC. This is as NGC ...

    • Does my Haas have the wireless network feature enabled?

      Overview Haas Next Gen Controls (NGC) have a paid wireless feature. This guide will help determine if your machine has the feature and if it's enabled. Checking for Wireless Feature Press SETTING button Go to Network tab at the top of the screen Go ...

    • How to Set Haas RS-232 Parameters

      Controls All Haas prior to 2016 Any Haas 2016 or later with an RS-232 interface Notate or take a picture of any parameters before you change them Set Parameters Standard Transfers (Default) Press SETNG GRAPH button Press Page Down button until you ...

    • Why does Haas Output Tool Offset?

      Problem When uploading a program from the CNC to the server, the program includes O999999 (TOOL OFFSET). This will cause a remote request program to fail because the program will exceed the maximum lines allowed. Reason A parameter is turned on ...

    • How to Test a Haas Serial Port

      Overview The Haas loopback test can be used to test the integrity of the serial port. This procedure was provided by Haas and is an official test. Preparation Change setting 14 to CTS/RTS On port 1 (top port), jump the following pins on the upper (or ...