How to Factory Reset Moxa NPort 5210A

How to Factory Reset Moxa NPort 5210A

Overview

This will restore all settings, including IP address, back to factory defaults.

Factory Reset

  1. Fully power up Moxa NPort 5210A
  2. Using a small pin such as a toothpick or paper clip, gently press and hold down the Reset Button, Ready LED will begin flashing green
  3. Release Reset Button when Ready LED turns off, approximately 6 seconds
  4. Wait until Ready LED turns green, approximately 6 seconds before power down the Moxa NPort 5210A again



    • Related Articles

    • How to Factory Reset Moxa NPort 5110

      Overview This will restore all settings, including IP address, back to factory defaults. Factory Reset Fully power up Moxa NPort 5110 Using a small pin such as a toothpick or paper clip, gently press and hold down the Reset Button, Ready LED will ...

    • How to Program Moxa NPort W2150A & W2250A in Wired Mode

      Overview This article will go through the steps to program a Moxa NPort W2150A & W2250A unit to be used in wired mode only. Requirements PC with available Ethernet port Ethernet Cable 12-48vdc Power Supply (12vdc included) Device Search Utility (DSU) ...

    • How to Factory Reset Moxa NPort W2150A & W2250A

      Overview This will restore all settings, including IP address and Wi-Fi settings, back to factory defaults. Factory Reset Fully power up Moxa NPort W2150A or W2250A Using a small pin such as a toothpick or paper clip, gently press and hold down the ...

    • How to Factory Reset Moxa NPort P5150A

      Overview This will restore all settings, including IP address, back to factory defaults. Factory Reset Fully power up Moxa NPort P5150A Using a small pin such as a toothpick or paper clip, gently press and hold down the Reset Button, Ready LED will ...

    • How to Use a Moxa W2150A / W2250A in Wired Mode

      Overview If there is a need to use a wired Ethernet connection instead of wireless, you can program the Moxa NPort device to function as a wired device instead. Requirements IP Address of Programmed Moxa NPort W2150A & W2250A Device Preparation If ...