How to Factory Reset Moxa NPort P5150A
Overview
This will restore all settings, including IP address, back to factory defaults.
Factory Reset
- Fully power up Moxa NPort P5150A
- Using a small pin such as a toothpick or paper clip, gently press and hold down the Reset Button, Ready LED will begin flashing green
- Release Reset Button when Ready LED turns off, approximately 6 seconds
- Wait until Ready LED turns green, approximately 6 seconds before power down the Moxa NPort P5150A again
Related Articles
How to Factory Reset Moxa NPort 5210A
Overview This will restore all settings, including IP address, back to factory defaults. Factory Reset Fully power up Moxa NPort 5210A Using a small pin such as a toothpick or paper clip, gently press and hold down the Reset Button, Ready LED will ...How to Factory Reset Moxa NPort 5110
Overview This will restore all settings, including IP address, back to factory defaults. Factory Reset Fully power up Moxa NPort 5110 Using a small pin such as a toothpick or paper clip, gently press and hold down the Reset Button, Ready LED will ...How to Factory Reset Moxa NPort W2150A & W2250A
Overview This will restore all settings, including IP address and Wi-Fi settings, back to factory defaults. Factory Reset Fully power up Moxa NPort W2150A or W2250A Using a small pin such as a toothpick or paper clip, gently press and hold down the ...How to Back Up and Restore Moxa NPort Drivers
Overview When moving your software to a new PC/Server, you must migrate the device drivers as well. This guide will assist with backing up and restoring Moxa NPort drivers. Requirements Local Administrator Rights Access to both old and new computers ...How to Factory Reset Digi ConnectPort TS 8 & 16
Overview The following article will reset the hub to factory defaults. After performing the factory reset, the system will revert to the default password which can be found on the bottom of the unit printed on a white label. This is required to ...