How to Locate Haas Spare 115vac Plugs

How to Locate Haas Spare 115vac Plugs

Overview

Most Haas CNC machines have spare 115vac plugs that can be used for 115vac powered accessories. This article will help determine if your machine has them. 
Warning
Opening the electrical cabinet should only be performed by trained technicians.

Requirements

  1. Access to Haas Electrical Cabinet

Checking for Spare Plugs

  1. Turn off the machine power and follow proper lock out/tag procedures
  2. Open the electrical cabinet
  3. In the upper righthand corner near the circuit breaks, look for 115VAC SPARES
    4. Info115vac spares plugs are number P12 thru P18
  4. If you see these plugs, you have 115vac spare plugs
    1. Older Haas CNC machines

    2. Newer Haas CNC machines


    • Related Articles

    • Parameters - Haas Classic Control

      Controls Any Haas with a RS-232 Port (usually 2016 or older, formally called Classic Haas Control or CHC) Notate or take a picture of any parameters before you change them Set Parameters Standard Transfers (Default) Press SETNG GRAPH button Press ...

    • Operator Guide - Haas Classic Control

      Overview This will explain how to output a program (send) from the CNC control and input a program (read) into the CNC control. Controls Supported Haas Classic Control (CHC) - 2016 or older How to Send Press LIST PROGRAM button Using the cursor, ...

    • How to Configure Haas NGC Network Settings

      Overview This will go over how to configure the wired Ethernet settings and Net Share on a Haas Next Generation Control. Configure Wired Connection settings Press SETTING button Go to Network tab Go to Wired Connection tab To set the following ...

    • Why does Haas Output Tool Offset?

      Problem When uploading a program from the CNC to the server, the program includes O999999 (TOOL OFFSET). This will cause a remote request program to fail because the program will exceed the maximum lines allowed. Reason A parameter is turned on ...

    • Troubleshooting Haas NGC Remote Net Share Authentication

      Overview Some earlier Haas NGCs have issues authenticating with Windows shares. This article will detail some options to make this work. Please try each one in order. Alternatively, updating the Haas NGC to the latest firmware is the best choice. ...