Operator Guide - Fanuc 0i Model D

Operator Guide - Fanuc 0i Model D

Overview

This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control.

Controls Supported

  1. Fanuc 0i-MD
  2. Fanuc 0i-TD

How to Punch

  1. Put control in EDIT mode
  2. Press PROG button
  3. Press DIR softkey
  4. Press (OPRT) softkey
  5. Press far right + softkey until you see "F OUTPUT"
  6. Press F OUTPUT softkey
  7. Type in O number without the O, e.g. 1234
  8. Press O SET softkey
  9. Press EXEC softkey

How to Read

  1. Put control in EDIT mode
  2. Press PROG button
  3. Press DIR softkey
  4. Press (OPRT) softkey
  5. Press far right + softkey until you see "F INPUT"
  6. Press F INPUT softkey
  7. Press EXEC softkey