Operator Guide - Mazak Fusion 640

Operator Guide - Mazak Fusion 640

Overview

This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control.

Controls Supported

  1. Mazatrol Fusion 640M, 640M, 640M 5X, 640M Nexus, 640M Pro
  2. Mazatrol Fusion 640T, 640TE, 640TN, 640T Nexus, 640T Pro

How to Punch EIA

  1. Press far left softkey
  2. Press DATA IN/OUT or DATA I/O softkey
  3. Press TAPE I/O or TAPE softkey
  4. Press PUNCH NC -> TAPE softkey
  5. Type the work number
  6. Press INPUT button
  7. Press START softkey

How to Read EIA

  1. Press far left softkey
  2. Press DATA IN/OUT or DATA I/O softkey
  3. Press TAPE I/O or TAPE softkey
  4. Press ALL LOAD NC <- TAPE or LOAD NC <- TAPE softkey
  5. Press START softkey

How to Punch CMT (Mazatrol)

  1. Press far left softkey
  2. Press DATA IN/OUT or DATA I/O softkey
  3. Press CMT I/O or CMT softkey
  4. Press SAVE NC -> CMT softkey
  5. Type the work number
  6. Press INPUT button
  7. Press START softkey

How to Read CMT (Mazatrol)

  1. Press far left softkey
  2. Press DATA IN/OUT or DATA I/O softkey
  3. Press CMT I/O or CMT softkey
  4. Press LOAD CMT -> NC softkey
  5. Type the work number
  6. Press INPUT button
  7. Press START softkey

    • Related Articles

    • Operator Guide - Fanuc 0

      Overview This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control. Controls Supported Fanuc 0-M Fanuc 0-T How to Punch Put control in EDIT mode Press PROG button Type in program number, ...

    • Operator Guide - Fanuc 0i Model F

      Overview This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control. Controls Supported Fanuc 0i-MF Fanuc 0i-TF How to Punch Put control in EDIT mode Press PROG button Press FOLDER softkey ...

    • Operator Guide - Fanuc 0i Model D

      Overview This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control. Controls Supported Fanuc 0i-MD Fanuc 0i-TD How to Punch Put control in EDIT mode Press PROG button Press DIR softkey ...

    • Operator Guide - Mori Seiki MSC-500s

      Overview This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control. Controls Supported MSC-500 (Fanuc 21i) MSC-501 (Fanuc 18i) MSC-502 (Fanuc 16i) MSC-521 (Fanuc 21i) MSC-518 (Fanuc 18i) ...

    • Operator Guide - Fanuc 16i, 18i, & 21i

      Overview This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control. Controls Supported Fanuc 16i Fanuc 18i Fanuc 21i How to Punch Put control in EDIT mode Press PROG button Press DIR ...