Operator Guide - Mazak SMART

Operator Guide - Mazak SMART

Overview

This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control.

Controls Supported

  1. Mazatrol SMART

How to Punch

Info
SMART controls also punch Mazatrol programs via this TAPE interface. 
  1. Press far left softkey
  2. Press DATA I/O softkey
  3. Press TAPE softkey
  4. Press PUNCH NC -> TAPE softkey
  5. Type the work number
  6. Press INPUT button
  7. Press START softkey

How to Read

Info
SMART controls also read Mazatrol programs via this TAPE interface.
  1. Press far left softkey
  2. Press DATA I/O softkey
  3. Press TAPE softkey
  4. Press ALL LOAD NC <- TAPE softkey
  5. Press START softkey

    • Related Articles

    • Operator Guide - Mazak Fusion 640

      Overview This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control. Controls Supported Mazatrol Fusion 640M, 640M, 640M 5X, 640M Nexus, 640M Pro Mazatrol Fusion 640T, 640TE, 640TN, 640T ...

    • Operator Guide - Fanuc 0

      Overview This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control. Controls Supported Fanuc 0-M Fanuc 0-T How to Punch Put control in EDIT mode Press PROG button Type in program number, ...

    • Operator Guide - Fanuc 0i Model F

      Overview This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control. Controls Supported Fanuc 0i-MF Fanuc 0i-TF How to Punch Put control in EDIT mode Press PROG button Press FOLDER softkey ...

    • Operator Guide - Fanuc 0i Model D

      Overview This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control. Controls Supported Fanuc 0i-MD Fanuc 0i-TD How to Punch Put control in EDIT mode Press PROG button Press DIR softkey ...

    • Operator Guide - Mori Seiki MSC-500s

      Overview This will explain how to output a program (punch) from the CNC control and input a program (read) into the CNC control. Controls Supported MSC-500 (Fanuc 21i) MSC-501 (Fanuc 18i) MSC-502 (Fanuc 16i) MSC-521 (Fanuc 21i) MSC-518 (Fanuc 18i) ...