Predator CNC Editor unable to send a program to a Fanuc 0M

Predator CNC Editor unable to send a program to a Fanuc 0M

Problem

Able to receive on the PC from the Fanuc 0M, but cannot load a file into the Fanuc; no errors and no LSK flashing. This while using Predator CNC Editor and a USB to Serial device. 

Solution

RTS and DTR must not me checked in Predator CNC Editor communication settings. 

    • Related Articles

    • How to License Predator CNC Editor License off Predator DNC

      Overview Predator CNC Editor is included for free with Predator DNC. Occasionally during the licensing process, Predator CNC Editor is not license properly and a Registration Information screen appears instead. This article will show you how to ...

    • How to Configure Predator MDC to Capture Details From NC Program

      Overview Predator MDC has the ability to capture job, part, and operation information from a NC program when it is sent to a CNC machine using Predator DNC. We can also trigger start the Setup status based on a unique string found in the NC program. ...

    • Predator CNC Editor Invalid Drive: D:\ Error

      Problem When running Predator CNC Editor, the error "Invalid Drive: D:\" appears, but I have no D drive. I am also unable to to repair or even uninstall the program.  Reason The Predator Software folder located on the C drive is missing or was ...

    • Predator CNC Editor Will Not Launch, SRCVW3.DLL Error

      Problem When launching Predator CNC Editor, the message "Failed to load control 'SourceView' from Srcvw3.dll. Your version of Srcvw3.dll may be outdated. Make sure you are using the version of the control that was provided with your application." ...

    • Capturing Predator MDC Information from NC Programs

      Overview Predator MDC when used in conjunction with Predator DNC to send and receive NC programs to and from CNC machines has the added benefit of capturing valuable information. This includes Job number, Part number, and Operation number. In ...