What are the USB Connect Error Codes?

What are the USB Connect Error Codes?

Overview

A list of error codes for the USB Connect Pendant and Portable units.

ERROR(2 or 4): DISK NOT FOUND

Solution:   Insert a USB disk key into the USB Connect and try again.

ERROR(21): FILE DOES NOT EXIST ON USB

Solution:   File selected or entered does not appear to be on the USB disk key.  Check the contents of the USB key and try again.

ERROR(23 or 40): INVALID FILE NAME

Solution 1: The file format is not the required in the 8 dot 3 format, i.e. TESTFILE.TXT.  The USB Connect does not support long files names.
Solution 2: File selected or entered does not appear to be on the USB disk key.
Check the contents of the USB and try again.

ERROR(35): FILE DOES NOT EXIST ON USB

Solution:   File selected or entered does not appear to be on the USB disk key.  Check the contents of the USB and try again.

ERROR(50, 51 or 52) BAD SUBDIRECTORY

Solution:  Directory selected does not appear to be on the USB disk key or  needs to be created by the USB Connect. Check the contents of the USB and try again.

ERROR(All other Error Numbers):

1. Possibly a bad USB disk key
2. USB disk key was incorrectly removed from USB Connect unit
3. The USB Connect unit is malfunctioning and needs repair.

    • Related Articles

    • USB LAN Connect Display not Working

      Overview If the USB, USB LAN, and LAN Connect screen display is not working, try the following solutions. If all fail, contact Shop Floor Automations. Check the Display Cable The gray display cable could be pinched, make sure it is not stuck between ...

    • How to Update Firmware on USB Connect Products

      Overview The following article will have you back up USB Connect settings and apply firmware updates. To update the firmware on a USB Connect Product, please consult with our technical support department to confirm compatibility prior to installing. ...

    • USB Connect Operation Guide

      Overview This KB is intended as an operation manual for the USB Connect devices. This will apply to both the pendant mount and portable model. Requirements The USB Connect device will work with a CNC control with a standard DB25 RS-232 serial ...

    • LED Status Lights on the Floppy Connect Emulator

      Green LED Status Light The green light indicates a floppy read or write operation has been done. No green light at all, or solid green light, indicates a problem. Red LED Status Light The red light indicates that the USB drive is inserted. The red ...

    • USB LAN Connect Operation Guide

      Overview This KB is intended to provide a description of the USB LAN Connect network FTP data server. The USB LAN Connect is an FTP server with at least 2 GB of local memory stored on a removable SD card. Data can be accessed over a LAN network as ...