Why does a Fanuc get a BG0002 TV Error when transferring with FOCAS Terminator?

Why does a Fanuc get a BG0002 TV Error when transferring with FOCAS Terminator?

Problem

When Predator DNC sends a program to a Fanuc via FOCAS Terminator, the control throws a BG0002 TV ERROR alarm.

Reason

TV Check is on.

Solution

Change parameter 0000 bit 0 (TVC) to 0.

    • Related Articles

    • How to Check for Fanuc FOCAS

      Overview This article will help identify if your control has Fanuc FOCAS. Check for Ethernet Port We are looking for the CD38A port, this is typically located in the main electrical cabinet or behind the LCD screen Electrical Cabinet location, common ...

    • What do the Fanuc Focas Terminator errors mean within Predator DNC?

      Error 5 "Data Error" Is the most common and it can occur when the following occurs: The O number that you are trying to send is the current or selected CNC program Try deleting the O number prior to sending to the CNC Bad or illegal character within ...

    • How to Configure Fanuc Network and FOCAS Settings

      Overview This article includes steps to configure network and FOCAS settings. Requirements Static IP Address, Subnet Mask, & Gateway Network Drop Preparation Plug network cable into CD38A port, this is typically located in the main electrical cabinet ...

    • How to Configure Fanuc FTP Settings - 2005 or Newer

      Overview This article includes steps to configure FTP and set the appropriate I/O channel to send to and from a FTP server. In this case, the CNC machine acts as the FTP client. Requirements CNC Connected to Network FTP Server IP Address FTP Server ...

    • How to Ping from a Fanuc Control

      Overview Pinging from the Fanuc control is an important troubleshooting step to determine of the CNC machine can talk to the network and/or a computer. Controls Fanuc 0i-MD, 0i-TD, 0i-MF, 0i-TF Fanuc 30i Model A, Model A5, Model B, Model B5 Fanuc 31i ...