Why does the Predator CNC Editor say it is still sending even though the transfer has completed?
If you are using the CNC Editor to transmit a CNC program, and the control receives the complete file, but Predator is still trying to send, check the end of the CNC program to make sure there are no spaces or other invisible characters after the % sign. Predator CNC Editor stops sending the program when it detects that the last character of the program is a % sign.
Related Articles
How to License Predator CNC Editor License off Predator DNC
Overview Predator CNC Editor is included for free with Predator DNC. Occasionally during the licensing process, Predator CNC Editor is not license properly and a Registration Information screen appears instead. This article will show you how to ...
How to Upgrade to Predator DNC v12
Overview This article will assist with the upgrade from Predator DNC v11 to v12. Requirements Local Administrator Rights Predator DNC v12 License (Serial Number starts with 0C) Download Predator DNC v12 Backup Predator DNC PXP Configuration File The ...
Predator CNC Editor Invalid Drive: D:\ Error
Problem When running Predator CNC Editor, the error "Invalid Drive: D:\" appears, but I have no D drive. I am also unable to to repair or even uninstall the program. Reason The Predator Software folder located on the C drive is missing or was ...
How to Enable Predator CNC Editor Colors, aka Syntax Highlighting
Overview The Predator CNC Editor offers a dynamic feature known as Syntax Highlighting, which allows users to apply color coding to various elements of their CNC programs. This includes registers, comments, and other components, customizable to the ...
Why am I unable to license CNC Editor software?
Even if the USB SIM is in the computer, and the serial number and access codes have been verified, this problem may still occur. There are many reasons for this, but the most common and easily solved reasons are: 1. Make sure you are opening the red ...