Why isn’t my USB to Serial cable working?
Simply plugging in the device may not always work. You may need to download the drivers for the hardware from our website prior to installing the device.
Otherwise, please contact Support.
Related Articles
How to Monitor Serial RS232 Activity on NPort Hardware
Overview Moxa NPorts have the ability to show TX and RX traffic using the web console. Requirements IP Address of Moxa NPort Unit Check Serial Traffic on W2150A/W2250A Log into the web console of the NPort unit using its IP address Go to System ...
What do the Moxa NPort 5110 LEDs Mean
Overview This guide will review what each LED lights means and what to do if there are problems. Ready LED Indicator (Status) Steady Green - Functioning normally Blinking Green - Responding to locate function Off - No power Make sure adequate power ...
What do the Moxa W2150A & W2250A LEDs Mean
Overview This guide will go over what the LED means on your device and what to do if there are problems. Ready LED Indicator (Boot Status) Steady Green - Functioning normally Blinking Green - Responding to locate function Off - No power. Make sure ...
How to Install and Configure Moxa UPort 1110
Do not plug UPort device into PC until prompted to do so Overview This article will go over the steps to install and configure drivers for the Moxa UPort 1110 USB to Serial Device. Requirements PC with an available USB port Preparation Download Moxa ...
How to Program Moxa AWK-1137C
Overview This article will go through the steps to program a Moxa AWK-1137C unit. Requirements PC with available Ethernet port Ethernet Cable 12-48vdc Power Supply (12vdc included) Static IP Address, Subnet Mask (Netmask), & Gateway SSID Wi-Fi ...