FAQs
Why am I unable to license CNC Editor software?
Even if the USB SIM is in the computer, and the serial number and access codes have been verified, this problem may still occur. There are many reasons for this, but the most common and easily solved reasons are: 1. Make sure you are opening the red ...
Why does the Predator CNC Editor say it is still sending even though the transfer has completed?
If you are using the CNC Editor to transmit a CNC program, and the control receives the complete file, but Predator is still trying to send, check the end of the CNC program to make sure there are no spaces or other invisible characters after the % ...
Does the Predator CNC Editor support long filenames?
Yes, the editor supports long filenames, long directory names, names with spaces, shared network drives, and UNC names. Refer to the following examples: Job 1234.NC H:CUSTOM PARTSJOB 4567.NC \\SERVER1\C\LARGE CUSTOMER\PART No 1234-5678.NC
What is the Predator CNC Editor “Wait” function for?
The wait function is designed to allow the operator to queue a file at the PC to send to the machine, and then receive at the machine. The steps would be similar to the following: At the PC, send a file out to the machine, using the wait option Walk ...
How do I add a Predator CNC Editor custom menu?
Creating a CNC Editor custom menu with Predator is for creating a shortcut to launch the desired program within Editor. Instead of going to your desktop or Start menu to start a common application, we can make a “bookmark” type link, which will ...
How do I setup “Wait” in Predator CNC Editor?
You can access the DNC COM port configuration one of two ways: In the Edit menu, Click “Template” > Choose your template > Click “Next” > Choose your MCH file > Name your template if necessary > Click “Next” > Click “DNC Properties.” > Check “Wait ...
What is the Maximum Baud Rate Predator CNC Editor Can Use?
Predator CNC Editor supports a maximum baud rate of 19200. If you want to communicate to your machines faster, Predator DNC is required.