How to Change Fanuc FTP Host
When using FTP with a Fanuc, you can have up to three hosts configured. This article includes steps to toggle between the different hosts.
Changing FTP Host
- Put control in EDIT mode
- Press PROG button
- Press FOLDER
- Press (OPRT)
- Press DEVICE CHANGE
- Press EMB ETHER
- Press HOST CHANGE
- On the top left portion of the screen, you will see CONNECT HOST and it will show 1, 2, or 3.
How to Configure Fanuc FTP Settings - 2005 or Newer
Overview This article includes steps to configure FTP and set the appropriate I/O channel to send to and from a FTP server. In this case, the CNC machine acts as the FTP client. Requirements CNC Connected to Network FTP Server IP Address FTP Server ...
How to Configure Fanuc Network and FOCAS Settings
Overview This article includes steps to configure network and FOCAS settings. Requirements Static IP Address, Subnet Mask, & Gateway Network Drop Preparation Plug network cable into CD38A port, this is typically located in the main electrical cabinet ...
How to Ping from a Fanuc Control
Overview Pinging from the Fanuc control is an important troubleshooting step to determine of the CNC machine can talk to the network and/or a computer. Controls Fanuc 0i-MD, 0i-TD, 0i-MF, 0i-TF Fanuc 30i Model A, Model A5, Model B, Model B5 Fanuc 31i ...
How to Change Fanuc IO Channel
Overview How to change the I/O channel on a modern Fanuc control. I/O Channels Channel Description 0, 1 RS-232C Serial Port 1 2 RS-232C Serial Port 2 4 Memory Card Interface (PCMCIA) 5 Data Server Interface 9 Embedded Ethernet Interface (FTP) 17 USB ...
How to Check for Fanuc FOCAS
Overview This article will help identify if your control has Fanuc FOCAS. Check for Ethernet Port We are looking for the CD38A port, this is typically located in the main electrical cabinet or behind the LCD screen Electrical Cabinet location, common ...