Does Shop Floor Automations LAN Connect support long CNC file names?
Yes, our newest version of the LAN Connect (LAN to CNC) will support long file names for ease of use with drag and drop functions. Easily add Ethernet to your machine. The best part? No proprietary software is needed.
Related Articles
How to Update USB LAN and LAN Connect Firmware
Requirement USB LAN or LAN Connect unit with a working network connection USB LAN or LAN Connect firmware file Preparation Download "AutoUpdate.exe (link) Download v9.53 firmware (link) Update the USB LAN or LAN Connect Firmware First, the USB LAN or ...
How to change the LAN Connect Time Zone
Overview How to change the time zone and set a time server in the LAN Connect INI file. Setting Time Zone Add the following to the .INI file "TIME ADJUST=##" ## = Time zone number e.g. "TIME ADJUST=-7" is Pacific Daylight Time or PDT Setting Public ...
LAN Connect Operation Guide
Overview This KB is intended to provide a description of the LAN Connect network FTP data server. The LAN Connect is an FTP server with at least 2 GB of local memory stored on a removable SD card. Data can be accessed over a LAN network as well as ...
LAN-USB Connect Operation Guide
Overview This KB is intended to provide a description of the LAN-USB Connect network FTP data server. The LAN-USB Connect is an FTP server with at least 2 GB of local memory stored on a removable SD card. Data can be accessed over a LAN network as ...
USB/LAN Connect Display not Working
Overview If the USB/LAN Connect screen display is not working, try the following solutions. If all fail, contact Shop Floor Automations. Check the Display Cable The gray display cable could be pinched, make sure it is not stuck between anything You ...