How to change the LAN Connect Time Zone

How to change the LAN Connect Time Zone

Overview

How to change the time zone and set a time server in the LAN Connect INI file. 

Setting Time Zone

  1. Add the following to the .INI file
    1. "TIME ADJUST=##" 
      1. ## = Time zone number
      2. e.g. "TIME ADJUST=-7" is Pacific Daylight Time or PDT

Setting Public NTP Server

  1. Add the following to the .INI file
    1. "IP ntp=207.200.81.113"

Example INI File

IP address=192.168.1.100
IP mask=255.255.252.0
IP gateway=192.168.1.1
IP dns=0.0.0.0
IP ntp=207.200.81.113
TIME ADJUST=-7

Time Zone Chart

Time Zone
Standard
Daylight
Atlantic Time (Puerto Rico)
-4
-3
Eastern Time
-5
-4
Central Time
-6
-5
Mountain Time
-7
-6
Pacific Time
-8
-7
Alaskan Time
-9
-8
Hawaiian Time
-10
n/a


    • Related Articles

    • LAN Connect Operation Guide

      Overview This KB is intended to provide a description of the LAN Connect network FTP data server. The LAN Connect is an FTP server with at least 2 GB of local memory stored on a removable SD card. Data can be accessed over a LAN network as well as ...

    • LAN Connect Installation Guide

      Overview This manual is intended to provide the installation procedure for the LAN Connect pendant-mounted device. Requirements The LAN Connect device will work with a CNC control with a standard DB25 RS-232 serial connection to the control box for ...

    • LAN-USB Connect Operation Guide

      Overview This KB is intended to provide a description of the LAN-USB Connect network FTP data server. The LAN-USB Connect is an FTP server with at least 2 GB of local memory stored on a removable SD card. Data can be accessed over a LAN network as ...

    • Floppy Connect Emulator Installation Guide for Universal Model

      Overview The Floppy Connect Emulator emulates your existing floppy drive & acts as if it were never removed. Works with almost any existing 720KB/1.44MB capacity DOS format floppy drive. 28 or 32 pin ribbon cables systems are supported & will connect ...

    • Floppy Connect Emulator Installation Guide for IBM Model

      Overview The Floppy Connect Emulator emulates your existing floppy drive & acts as if it were never removed. Works with almost any existing 720KB/1.44MB capacity DOS format floppy drive. 28 or 32 pin ribbon cables systems are supported & will connect ...