How to Access LAN Connect Using a Peer-to-Peer Network

How to Access LAN Connect Using a Peer-to-Peer Network

Overview

Sometimes its desired to connect a computer directly to the LAN Connect. This is useful when troubleshooting or you do not want to connect to your corporate network. 

Requirements

  1. LAN Connect
  2. Computer with available Ethernet port
  3. Ethernet patch cable

Connect to LAN Connect

  1. Plug the Ethernet patch cable into your computers Ethernet port
  2. Plug the other end of the Ethernet patch cable into the LAN Connect Ethernet port
  3. Set your network card to be on the same subnet
    1. e.g. LAN Connect is 192.168.0.100, set you network card to 192.168.0.101
  4. Connect to the LAN Connect FTP server to access SD Card

    • Related Articles

    • How to Update USB LAN and LAN Connect Firmware

      Requirement USB LAN or LAN Connect unit with a working network connection USB LAN or LAN Connect firmware file Preparation Download "AutoUpdate.exe (link) Download v9.53 firmware (link) Update the USB LAN or LAN Connect Firmware First, the USB LAN or ...

    • LAN Connect Operation Guide

      Overview This KB is intended to provide a description of the LAN Connect network FTP data server. The LAN Connect is an FTP server with at least 2 GB of local memory stored on a removable SD card. Data can be accessed over a LAN network as well as ...

    • LAN-USB Connect Operation Guide

      Overview This KB is intended to provide a description of the LAN-USB Connect network FTP data server. The LAN-USB Connect is an FTP server with at least 2 GB of local memory stored on a removable SD card. Data can be accessed over a LAN network as ...

    • How to change the LAN Connect Time Zone

      Overview How to change the time zone and set a time server in the LAN Connect INI file. Setting Time Zone Add the following to the .INI file "TIME ADJUST=##" ## = Time zone number e.g. "TIME ADJUST=-7" is Pacific Daylight Time or PDT Setting Public ...

    • LAN Connect Installation Guide

      Overview This manual is intended to provide the installation procedure for the LAN Connect pendant-mounted device. Requirements The LAN Connect device will work with a CNC control with a standard DB25 RS-232 serial connection to the control box for ...