How to Change Moxa NPort W2150A & W2250A IP Address

How to Change Moxa NPort W2150A & W2250A IP Address

Overview

This article will go through the steps to change the IP address on a Moxa NPort W2150A/W2250A.

Requirements

  1. IP Address of Moxa NPort unit
  2. SSID
  3. Wi-Fi Security Information

How to Update Wi-Fi Settings

  1. From a web browser, go to http://[moxa_ip_address]
    1. e.g. http://192.168.1.100/
  2. Type "admin" in Account field
  3. Type "moxa" in Password field
    4. If this fails, try leaving the password field blank
  4. Click Login
  5. Go to Network Settings > WLAN Settings > WLAN
  6. Set IP configuration to "Static"
  7. Type your IP address in IP address field
  8. Type your Subnet Mask in Netmask field
  9. Type your Gateway in Gateway field
  10. Click Submit

Finalize Configuration

  1. Go to Restart > Restart System
  2. Click Submit
  3. As soon as the Ready LED on the Moxa device turns red, disconnect the Ethernet cable
  4. Upon successful connection to your Wi-Fi network, the Ready and WLAN LEDs will be solid green and the signal bars should illuminated, this can take up to 30 seconds
  5. To confirm connectivity, ping IP address from computer designated to host software



    • Related Articles

    • How to Change Moxa NPort Driver IP Address

      Overview The following article will guide you through the steps to change the IP address associated with a NPort device. It involves removing the driver and adding it back in with the new IP address. Requirements Local Administrator Rights IP ...

    • How to Program Moxa NPort W2150A & W2250A

      Overview This article will go through the steps to program a Moxa NPort W2150A & W2250A unit. Requirements PC with available Ethernet port Ethernet Cable 12-48vdc Power Supply (12vdc included) Device Search Utility (DSU) Static IP Address, Subnet ...

    • How to Factory Reset Moxa NPort W2150A & W2250A

      Overview This will restore all settings, including IP address and Wi-Fi settings, back to factory defaults. Factory Reset Fully power up Moxa NPort W2150A or W2250A Using a small pin such as a toothpick or paper clip, gently press and hold down the ...

    • How to Factory Reset Moxa NPort 5110

      Overview This will restore all settings, including IP address, back to factory defaults. Factory Reset Fully power up Moxa NPort 5110 Using a small pin such as a toothpick or paper clip, gently press and hold down the Reset Button, Ready LED will ...

    • How to Factory Reset Moxa NPort 5210A

      Overview This will restore all settings, including IP address, back to factory defaults. Factory Reset Fully power up Moxa NPort 5210A Using a small pin such as a toothpick or paper clip, gently press and hold down the Reset Button, Ready LED will ...