1. All Fadal Controls

Notate or take a picture of any parameters before you change them

Set Parameters

1. Press MANUAL button until you see “ENTER NEXT COMMAND <”
   
2. Type “SETP” and press ENTER button
   
3. Press ENTER button to keep G-code style setting
   
4. Set baud rate using one of the following values
   
1. 6 = 2400
   
2. 7 = 4800
   
3. 8 = 9600
   
4. 9 = 19200
   
5. 10 = 38400
   
5. Press ENTER button
   
6. Press MANUAL button to exit parameters
   
7. Turn off main power for 5 minutes, then turn back on
   
8. Parameters have now been set