How to Import a Moxa W2150A & W2250A Configuration

How to Import a Moxa W2150A & W2250A Configuration

Overview

Instead of manually programming a Moxa NPort W2150A & W2250A configuration, you can import the configuration. 
Requirements
  1. PC with available Ethernet Port
  2. Ethernet Cable
  3. 12-48vdc Power Supply (12vdc included)
  4. Device Search Utility (DSU)
  5. NPort Configuration File

Preparation

  1. Download and install DSU (link)

Import Configuration

  1. Plug in Ethernet cable between Ethernet port located on the top of the unit and your PC Ethernet port
  2. Plug power supply into Moxa
  3. Launch DSU
  4. Click Search and wait for it to complete

  5. Verify the MAC address matches the white label on the back of the unit
  6. Double click the device in DSU to open in web browser
  7. Type "admin" in Account field
  8. Type "moxa" in Password field
  9. Click Login

  10. Go to System Management > Maintenance > Configuration Import
  11. Check the box for "Import all configuration, including IP configurations"
  12. Click Choose File and navigate to the configuration file, click Open once found
  13. Click Submit
  14. Click OK to the prompt, unit will reboot
  15. Click Submit
  16. As soon as the Ready LED on the Moxa device turns red, disconnect the Ethernet cable
  17. Upon successful connection to your Wi-Fi network, the Ready and WLAN LEDs will be solid green and the signal bars should illuminated, this can take up to 30 seconds
  18. To confirm connectivity, ping IP address from computer designated to host software


    • Related Articles

    • How to Program Moxa AWK-1137C

      Overview This article will go through the steps to program a Moxa AWK-1137C unit. Requirements PC with available Ethernet port Ethernet Cable 12-48vdc Power Supply (12vdc included) Static IP Address, Subnet Mask (Netmask), & Gateway SSID Wi-Fi ...

    • How to Program Moxa NPort W2150A & W2250A

      Overview This article will go through the steps to program a Moxa NPort W2150A & W2250A unit. Requirements PC with available Ethernet port Ethernet Cable 12-48vdc Power Supply (12vdc included) Device Search Utility (DSU) Static IP Address, Subnet ...

    • How to Use a Moxa W2150A / W2250A in Wired Mode

      Overview If there is a need to use a wired Ethernet connection instead of wireless, you can program the Moxa NPort device to function as a wired device instead. Requirements IP Address of Programmed Moxa NPort W2150A & W2250A Device Preparation If ...

    • How to Back Up and Restore Moxa NPort Drivers

      Overview When moving your software to a new PC/Server, you must migrate the device drivers as well. This guide will assist with backing up and restoring Moxa NPort drivers. Requirements Local Administrator Rights Access to both old and new computers ...

    • How to Install and Configure Moxa UPort 1110

      Do not plug UPort device into PC until prompted to do so Overview This article will go over the steps to install and configure drivers for the Moxa UPort 1110 USB to Serial Device. Requirements PC with an available USB port Preparation Download Moxa ...