How to Locate Haas has Spare 115vac Plugs

How to Locate Haas has Spare 115vac Plugs

Overview

Most Haas CNC machines have spare 115vac plugs that can be used for 115vac powered accessories. This article will help determine if your machine has them included. 
Warning
Opening the electrical cabinet should only be performed by trained technicians.

Requirements

  1. Access to Haas Electrical Cabinet

Checking for Spare Plugs

  1. Turn off the machine power and follow proper lock out/tag procedures
  2. Open the electrical cabinet
  3. In the upper righthand corner near the circuit breaks, look for 115VAC SPARES
    4. Info115vac spares plugs are number P12 thru P18
  4. If you see these plugs, you have 115vac spare plugs
    1. Older Haas CNC machines

    2. Newer Haas CNC machines


    • Related Articles

    • Haas RS-232 Parameters

      Controls Any Haas with a RS-232 Port (usually 2016 or older, formally called Classic Haas Control or CHC) Notate or take a picture of any parameters before you change them Set Parameters Standard Transfers (Default) Press SETNG GRAPH button Press ...

    • Why does Haas Output Tool Offset?

      Problem When uploading a program from the CNC to the server, the program includes O999999 (TOOL OFFSET). This will cause a remote request program to fail because the program will exceed the maximum lines allowed. Reason A parameter is turned on ...

    • Troubleshooting Haas NGC Remote Net Share Authentication

      Overview Some earlier Haas NGCs have issues authenticating with Windows shares. This article will detail some options to make this work. Please try each one in order. Alternatively, updating the Haas NGC to the latest firmware is the best choice. ...

    • How to Test a Haas Serial Port

      Overview The Haas loopback test can be used to test the integrity of the serial port. This procedure was provided by Haas and is an official test. Preparation Change setting 14 to CTS/RTS On port 1 (top port), jump the following pins on the upper (or ...

    • How to Configure Haas NGC DPRNT

      Overview Haas with Next Generation Control (NGC) allows DRPNT, but not using the traditional RS232 port. You can export DPRNT statements using a TCP port or save it to a file. This is a common practice to collect probe data from the control. Set ...