How to Save Haas Machine Data via RS232

How to Save Haas Machine Data via RS232

Overview

This article will review how to save Settings, Macro Variables, Offsets, Parameters, etc. from a Haas Classic Control (CHC) via RS232. 

Requirements

  1. Haas CHC already connected to PC via RS232

Procedure to Save Machine Data via RS232

  1. Go to List Programs
  2. Go to page you want to save such as Parameters or Offsets
  3. Get PC ready to receive data
  4. Press SEND RS232 button
  5. Data will be received on PC

    • Related Articles

    • How to Set Haas RS-232 Parameters

      Controls All Haas prior to 2016 Any Haas 2016 or later with an RS-232 interface Notate or take a picture of any parameters before you change them Set Parameters Standard Transfers (Default) Press SETNG GRAPH button Press Page Down button until you ...

    • How to Configure Haas NGC DPRNT

      Overview Haas with Next Generation Control (NGC) allows DRPNT, but not using the traditional RS232 port. You can export DPRNT statements using a TCP port or save it to a file. This is a common practice to collect probe data from the control. Set ...

    • How to Test a Haas Serial Port

      Overview The Haas loopback test can be used to test the integrity of the serial port. This procedure was provided by Haas and is an official test. Preparation Change setting 14 to CTS/RTS On port 1 (top port), jump the following pins on the upper (or ...

    • How to Edit Haas 9000 Programs

      Overview By default, 9000 programs are protected and cannot be edited. Enabling a parameter is required to edit 9000 programs. It is absolutely critical you know what you are doing when working with 9000 programs. Changing or deleting a protected ...

    • How to Determine if a Haas has Spare 115vac Plugs

      Overview Most Haas CNC machines have spare 115vac plugs that can be used for 115vac powered accessories. This article will help determine if your machine has them included. Opening the electrical cabinet should only be performed by trained ...